1 Tube dimensions and specifications

1.1 Inside diameter, mm

1.2 Tube length, m

1.2.1 → pipe open on both ends

1.3 Pipe-bends present

1.3.1 → number of pipe-bends

1.3.2 → pipe-bends with r = 1,5 x d

1.3.3 → pipe-bends with r = 3 x d

1.3.4 → pipe-bends with other radius (r = ?)

1.4 Number of 180° bends

1.5 Horizontal and/or vertical pipes

1.6 T-, Y-bends or bypass present

1.7 Compensator present

1.7.1 → difference to inside diameter (1.1), mm

1.8 Valve present

1.8.1 → type of valve

1.8.2 → smallest diameter at open valve, mm

1.9 Reducer present or similar change of tube diameter

1.9.1 → smallest diameter

1.9.2 → largest diameter

2 What shall be inspected?

2.1 Surfaces of tubes

2.2 Longitudinal welded seams

2.3 Circular welded seams

2.4 Cracks / faults

2.5 Weld reinforcement

2.5.1 → Is the expected height of excessive reinforcement exceptionally large?

2.6 Heat tinting

2.7 Rust / corrosion / pittings

2.8 Product tailings / dirt traps

2.8.1 → smallest inside diameter?

2.9 Completeness check

3 Which direction of view or optics is desired?

3.1 Direct view with wide angle

3.2 Direct view with fisheye

3.3 Zoom lens

3.4 Pan & Tilt

3.5 90° side view

Company:

*Name: (Required field)

Dept.:

*Adress: (Required field)

*eMail: (Required field)

*Phone: (Required field)

Fax: